BX Back Box
The BX Backbox is made from MDF, comes pre-drilled and ships disassembled. Recommended for installations with open spaces behind the drywall such as attic areas. The BX series has a depth of 8-3/8” (213 mm) eliminating it for use in traditional in-wall installations. The BX series is designed to be assembled and attached to the speaker at the time of speaker’s installation.
SLR8-MK Back Box Modification Kit
When using a BX series backbox kit with the SLR8 speaker, it is necessary to add this modification kit. The kit contains a second box end with connector cup to accommodate the additional speaker input.
MBX Metal Back Box
Back boxes should be installed before wallboard is hung and insulated before speakers are installed. Two knock-out ports are located on top and bottom of the box. Insulation is included.
Must install PlaceSaver® over MBX to ensure proper rough opening.
MBA Metal Back Box - Adjustable
For variable width framing, hat channel, and metal studs
Adjustable width from 9-1/2” (241 mm) to 14-1/2” (368 mm) and should be installed before wallboard is hung. Back boxes should be insulated before speakers are installed. Two knock-out ports are located on top and bottom of the box. Self-adhesive Dynamat insulation is included.
Must install PlaceSaver® over MBA to ensure proper rough opening.
PlaceSavers®
PlaceSavers® are temporary place-holders for use on new construction. PlaceSavers® protect speakers to a minimum by reducing the speaker panel’s exposure on the harsh construction environment. Each Stealth Acoustics speaker panel has a corresponding PlaceSaver model. PlaceSavers® are sold in packs of six (3 pair) and are re-usable. PlaceSavers® are also designed to mate with MBX and MBA series back boxes as a system.
Must install PlaceSaver with MBX or MBA to ensure proper rough opening.
Shim Kit
The Shim Kit allows for the speaker panels face to be shimmed out further depending on the finishing method. Each kit contains both 1/16” (1.6 mm) and 1/8” (3.2 mm) thick shims in bundles of 25.