Stealth Model AX3 Invisible In-Wall Speaker

MAP $1500.00 per pair U.S.

Three-Way Totally Invisible In-Wall or Ceiling Loudspeaker

The Stealth Acoustics model AX3 is a three-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame which attaches directly to standard structural framing without the need for special mounting brackets. The paintable active diaphragm face is a structurally modified three layer composite consisting of two layers of graphics grade paper with a foam core. The diaphragm is bonded to the frame, creating an active area surrounded by a stable mounting area. Basic installation instructions are shown on our removable cover sheet that comes off before taping and finishing begins. The face of the panel has been pre-primed and is ready to receive finishing materials. The edges of the panel are tapered similar to the edges of gypsum wallboard, providing the room necessary for normal wallboard tape and joint compound to be used to feather the speaker seamlessly into the wall or ceiling. The AX3 loudspeaker comes equipped to match either 1/2” or 5/8” wallboard installations. On-site finishing options include latex paint, covering with light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials.

Stealth Acoustics speaker invisibility allows for powerful advantages over other loudspeakers as they can be placed wherever they sound best, free of visual concerns that may conflict with architectural features. Stealth Acoustics offers complete, invisible companion subwoofer solutions for extended low frequency response.

Advanced Technologies

The Stealth AX3 is a three-way system, incorporating an acoustically coupled high quality, high-power 8" cone woofer and 3 directly-coupled 25mm neo-magnet high/mid-frequency motors, mounted in a “Balanced Midline Drive tm” configuration. Advanced internal carbon fiber materials allow for smooth frequency extension to 20kHz, even with four coats of paint. As with all Stealth speakers, the crossover system is over-provisioned to take abuse and is equipped with self-resetting poly switches to protect the drivers well below their rated power handling. To further ensure consistent quality, we test each Stealth speaker with computer analysis and a listening test before they are released for shipment.

Front view of the Model AX3 In-Wall Speaker.

Download AX3 Specifications Sheet (PDF format)

A3 CLF and EASE Technical Data Downloads

Rear view of the Model AX3 In-Wall Speaker.