LR6g

Full Range, 2-Way Invisible In-Wall or In-Ceiling Speaker

The Stealth Acoustics model LR6G is a 2-way, full-range speaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area. 

The Stealth Acoustics LR6G incorporates an acoustically coupled, high-power 6.5” cone woofer and a direct coupled 30 mm neo-magnet high-frequency motor. Advanced internal carbon fiber materials allow for smooth frequency extension to 20kHz. When the LR6G is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 45Hz can be achieved. The LR6G contains two independent protection circuits (high-frequency and low-frequency sections) that automatically reset upon reduction of excessive amplifier power.

The LR6G may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.

Recommended Uses

Background Distributed Audio

Best for in-wall or in-ceiling installations

Downloads

LineaResponse Brochure: Download PDF
Specification Sheet: Download PDF
Installation Instructions: Download PDFView Instructions & Video
Dimensional Drawings: Download PDF
Test Results: Download PDF

Specifications

Frequency Response:

45Hz to 20kHz

Power Capacity:

100 watts RMS

50 watts minimum
recommended power

Protection:

Two independent self-resetting
devices (low and high frequency)

Sensitivity:

83 dB (1 watt / 1 meter)

System Impedance:

8Ω nominal

Driver Components:

High frequency:

1-1/8” (30 mm) neodymium motor

 

Low-frequency:

1-1/2” (38 mm) voice coil, 6-1/2” (165 mm) woofer

Ceramic 15 oz. (425 gr) magnet

Polar Dispersion:

170 degrees vertical and horizontal

Dimensions:

Width: 15-7/8” (403 mm)

Height: 11-7/8” (302 mm)

Mounting Depth:

2-1/4” (58 mm)

Product Weight:

8.7 lbs. (3.9 kg) each

Shipping Weight:

21 lbs. (9.5 kg) per pair

13 lbs. (5.9 kg) per single

Included Accessories:

Mounting shims

Shim Tape

Mounting screws

Terminal wrench

Optional Accessories:

PS-12 PlaceSaver

BX-12 MDF Acoustical Back Box

MBX-12 UL Listed Metal Back Box

MBC-12 Concrete Back Box

SK-1 Shim Kit

CVXMR 100, 75 and 25 volt Constant Voltage Transformers

WARRANTY – Standard 20-Year Limited